Visos kategorijos

Honda WT 30

(0)
5★
4★
3★
2★
1★

Vertinti gali tik užsiregistravę klientai atlikę bent vieną sėkmingą pirkimą

Prekės kodas: WT 30 Garantija:  24 mėnesiai
Kaina
1681.14 €

! Liko paskutiniai 5 vnt.!

Į krepšelį Kiekis:

Pristatymo būdai:

Atsiimkite 1a.lt klientų aptarnavimo centre
Penktadienį (15.12) po 10:00
Pristatymas kurjeriu Jūsų adresu
18.12.2017

Prekės pagrindinės savybės:

  • Tipas: Vandens tiekimo
  • Galingumas (kW): 5.29
  • Maksimalus našumas (m3/h): 72.6
  • Maksimalus slėgis (bar): 2.7
  • Didžiausias panardinimo gylis (m): 8
  • Svoris (kg): 60
Daugiau apie prekę

"GF Lizingas" skaičiuoklė:

Mėnesinė įmoka: 160.26
Gamintojas Honda
Tipas

Drenažiniai siurbliai montuojami giliai, puikiai tinka šuliniams, giliems vandens rezervuarams.

Vandens tiekimo siurbliai įprastai naudojami tiekti vandenį laistymui, nešvaraus vandens išsiurbimui ir pan.

Vandens tiekimo
Galingumas (kW) 5.29
Maksimalus našumas (m3/h) 72.6
Maksimalus slėgis (bar) 2.7
Didžiausias pakėlimo aukštis (m)

Nurodoma, į kokį aukšti galima pumpuoti vandenį.

27
Didžiausias panardinimo gylis (m)

Nurodoma, kokiame gylyje galima montuoti siurblį. Pavyzdžiui jeigu šulinyje vanduo yra 5,50 metro gylyje, didžiausias panardinimo gylis turėtų būti mažiausiai 6 metrai.

8
Svoris (kg) 60
Ypatingos žymės Variklis: GX240
Bako tūris: 5.3 l
Oil Alert sistema
Antivibracinė sistema
Honda WT 30
Prekės aprašymas anglų kalba:

Heavy-duty 3" construction trash pump

Specially designed for job sites and applications where high volume trash water capacity is needed.

Solid handling capability up to 1 1/16"
The specially designed impeller allows solids to pass through easily, without clogging.

Easy starting Honda OHV commercial engine
The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.

Heavy duty full frame protection
Protects the pump, while offering a convenient tie down location for transport.

Easy quick clean out port
The WT30 is designed for quick and easy service. An easy access service port makes clean-out quick.

Replaceable stainless steel wear plate
The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs

Standard service tool
A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.

Durable silicon carbide mechanical seal
The WB20 features abrasion-resistant silicone-carbide seals for extended wear.

Cast iron volute and impeller
The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.

Isolation mounted engine and pump
High performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.

Unique conical shaped impeller
The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.

Protected by Honda Oil Alert®
Protects the pump by shutting the engine off when low oil is detected.

Large heavy duty metal strainer
The strainer allows up to 1 1/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.
Honda Honda WT 30
Honda WT 30
Prekės aprašymas anglų kalba:

Heavy-duty 3" construction trash pump

Specially designed for job sites and applications where high volume trash water capacity is needed.

Solid handling capability up to 1 1/16"
The specially designed impeller allows solids to pass through easily, without clogging.

Easy starting Honda OHV commercial engine
The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.

Heavy duty full frame protection
Protects the pump, while offering a convenient tie down location for transport.

Easy quick clean out port
The WT30 is designed for quick and easy service. An easy access service port makes clean-out quick.

Replaceable stainless steel wear plate
The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs

Standard service tool
A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.

Durable silicon carbide mechanical seal
The WB20 features abrasion-resistant silicone-carbide seals for extended wear.

Cast iron volute and impeller
The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.

Isolation mounted engine and pump
High performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.

Unique conical shaped impeller
The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.

Protected by Honda Oil Alert®
Protects the pump by shutting the engine off when low oil is detected.

Large heavy duty metal strainer
The strainer allows up to 1 1/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.
WT 30 1681.14
Užduoti klausimą

captcha
Į viršų