Noctua Fan NF-F12 120mm PWM

Noctua Fan NF-F12 120mm PWM

(8)

Prekės kodas: 328223

21,39 / vnt.
21,39 / vnt.
Gaukite į namus už 3,49 €*. Pristatysime lapkričio 28 d.
* Pristatymo kaina apskaičiuota įvertinus aptarnavimo mokestį ir prekės svorį: 2.00 kg
Atsiimkite nemokamai. Paruošime lapkričio 27 d.
Gaukite į paštomatą už 1,99 €. Pristatysime lapkričio 28 d.
Prekės informacija

Bendrosios charakteristikos

Prekės tipas Oro aušintuvai
Prekės ženklas Noctua
Modelis NF-F12
Paskirtis
Aušintuvai turi kelis pritaikymo būdus – procesoriui, vaizdo plokštei, korpusui ir kt.
Korpusui

Papildomai

Garantija 24 mėn
Papildoma informacija 4-Pin PWM. Matmenys: 120 x 120 x 25 mm. Ventiliatoriaus greitis: 1500 R.P.M. ± 10%.
Noctua NF-F12 PWM
Prekės aprašymas anglų kalba:


Focused Flow™ frame
Designed for pressure demanding applications such as heatsinks and radiators, the Focused Flow™ frame features eleven stator guide vanes that straighten, channel and focus the airflow, which allows the NF-F12 to rival the performance of conventional fans running at much faster speeds.

Varying Angular Distance and Vortex Control Notches
The NF-F12's stator guide vanes are set out in Varying Angular Distance and feature Vortex-Control Notches. Both measures help to spread the noise emission over a broader frequency spectrum and thus make the fan's sound pattern more agreeable to the human ear.

Heptaperf™ Impeller
Custom designed for the new Focused Flow™ frame and to work in tandem with the eleven stator guide vanes, the NF-F12's seven blade Heptaperf™ impeller has been carefully optimised to achieve a perfect balance between power and quietness.

Stepped Inlet Design
Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.

Inner Surface Microstructures
With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.

Integrated anti-vibration pads
Integrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.

SSO2 Bearing
The NF-F12 is the first fan to feature the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.

Metal bearing shell
In order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the NF-F12 sports a CNC milled bearing shell made entirely from brass.

Custom-designed PWM IC with SCD
Supporting fully automatic PWM speed control, the NF-F12 uses Noctua's novel, custom-designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (SCD) technology. By providing smoother torque impulses, SCD suppresses PWM switching noises and thus makes the fan quieter at lower speeds.

Ultra-Low Power Consumption
The NF-F12 draws only 0.6W, which is more than 50% less than many fans in the same speed range. This doesn't only make it eco-friendly but also cuts down the electricity bill: Compared to a typical 2W fan, this allows you to save about half the price of the NF-F12 after 5 years of continuous use.

Low-Noise Adaptor
The NF-F12 is supplied with a (L.N.A.) that reduces the maximum fan speed from 1500 to 1200rpm. The L.N.A. can be used either to run the fan at a fixed speed of 1200rpm or to cap the maximum speed when using automatic PWM control.

Extensive cabling options
The fan's short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows the connection of a second NF-F12 fan to the same PWM fan header for automatic control.
Prekės atspalvis gali skirtis nuo matomo nuotraukoje. Produkto aprašymas yra bendro pobūdžio, jame nebūtinai yra paminėtos visos produkto savybės. El. parduotuvės prekių kainos gali skirtis nuo prekių kainų prekybos centruose. Akcijos el. parduotuvėje gali skirtis nuo aptarnavimo centruose ar parduotuvėse taikomų akcijų. Prekių likutis sandėlyje ir el. parduotuvėje išimtinais atvejais gali nesutapti, todėl išlieka galimybė, kad pristatymo terminai gali skirtis nuo nurodytų užsakymo pateikimo metu ir/arba Jūsų užsakymo įvykdyti negalėsime arba įvykdysime tik jo dalį.

Pastebėjote klaidą prekės aprašyme, savybių lentelėje ar nuotraukų galerijoje? Praneškite mums

4,4/5
8 įvertinimai
  • {{ item.value }}
    {{ item.percent }}%
{{ item.consumer.name }}
{{ item.rating_value }} /5
{{ RatingsHelper.formatDate(item.reviewed_at) }}

{{ item.content }}

Laukiama...