Prisijunk prie SMART NET ir sutaupyk! Prisijunk

Kompiuterio korpusas Phanteks, balta


Atsiprašome, šios prekės dabar neturime. Tačiau siūlome peržiūrėti kitas šios kategorijos prekes – tikime, kad rasite panašią prekę.

Taip pat gali tęsti apsipirkimą grįždamas(-a) į titulinį puslapį arba paieškos laukelyje įrašyti, kokios prekės ieškai.
Prekės informacija

Gaminio savybės

Bendrosios charakteristikos

Prekės tipas Korpusai
Prekės ženklas Phanteks
Korpuso dydis
Nurodo standartinį pagrindinės plokštės form-factor dydi.
Mid tower (ATX)
Medžiaga Plastikas, Plienas
Spalva Balta
Integruotas maitinimo blokas (PSU) Ne

Išplėtimo galimybės

3.5 colio skyrių skaičius
Drive Bays - tai vieta techninei įrangai įdėti į kompiuterio korpusą. Šiandien dažniausiai naudojami keturių Form Factor tipų Drive bays (dydžiai) - 5,25 ", 3.5", 2.5" ir 1.8".
2

Priekinio skydelio jungtys

Jungtys
Nurodomos išorinės jungtys esančios priekinėje korpuso pusėje.
Apšvietimo valdiklis, USB 3.0

Matmenys ir svoris

Svoris 7 kg

Papildomai

Garantija 24 mėn
Papildoma informacija Korpuso tipas: Midi Tower. Plokštės suderinamumas: E-ATX (plotis iki 272 mm), ATX, Micro-ATX, Mini-ITX. Diskų skyriai: 2x 2.5". Išplėtimo lizdai: 7
Prekės aprašymas anglų kalba:
The cases of the Eclipse Series P400 are aimed at beginners and also offer many interesting features for experienced PC enthusiasts. With a power button illuminated by RGB LEDs as well as an "ambient down light", an LED strip on the lower front that illuminates the surroundings of the Eclipse tower in ten selectable colors, the Dutch are setting their own colorful accents! The cases of the Eclipse P400 series are available in different colors, eg black, white or anthracite, and for every available color version there is a version with or without a window. In addition to the color and window variants, Eclipse enclosures are also available with factory-integrated housing insulation, which can be found under the name Eclipse P400S.
Midi-Tower by PHANTEKS with LED lighting & sophisticated look The white Eclipse P400S Midi-Tower from the PHANTEKS Eclipse series offered here convinces already visually with its clear lines and the noble, rather restrained design. The one-piece front panel gives the case a very noble look, which is further enhanced by the external LED lighting on the lower front. The "PHANTEKS" lettering under the lower air intake illuminated by the LEDs gives the Midi Tower that "certain something" and the slats on the upper front, which also serve ventilation, are a welcome contrast to the simplicity of the front panel.

At the edge between the front and the lid are the reset switch, the fan control and the LED control positioned in the notch between the lid and the upper air inlet in the front. In the middle of the front of the lid is the RGB LED backlit power button, while the two audio ports and the two USB 3.0 ports on the "front" panel are offset laterally to the right. The majority of the lid takes a large, removable dust filter, which acts like a large mesh grid and rests on a large ventilation grille. Insulated Midi Tower: Ideal for silent gaming PCs The Eclipse P400S Midi-Tower has been equipped by PHANTEKS but factory with noise reduction mats. Both side panels have been completely provided with insulation material, similar to the insulated front, only the lid is an exception here. For example, two quadratic 140 mm insulating plates are used on the lid, which are laid from above onto the ventilation grille. If one or both of the two fan slots are occupied by a fan, one or two square dust filters can be used instead of the insulation boards.
Media Enclosure for Gaming Graphics Cards & AiO Water Cooling Also, the interior of the white Eclipse P400S looks very noble thanks to the black paint and is divided by a power supply cover with perforated grid on the top in two parts. The PSU-Shroud also hides the two 90 ° -rotated drive bays, which allow a tool-free installation of two 3.5-inch HDDs on the right side, after removing the side panels attached by thumb-screws. Behind the motherboard tray, up to two SSDs can be mounted in Drop-N-Lock SSB brackets, leaving 25 mm space for cable management. Velcro cable fasteners make it easy to lay cables and rubberized bushings in the tray protect the cables used.

up to 395 mm long graphics cards and radiator mountings for AiO water cooling and custom water cooling. For example, the case in the back has built-in options for a 120mm fan or equivalent radiator, while the front can accommodate three 120mm fans or two 140mm fans. As an alternative to the front fans, 280 or 360 heat exchangers can be installed in the front. To install a 360 mm radiator , however, a cover in the PSU Shroud and the cages for the HDDs must be removed. In addition to the two pre-installed 120-mm fans , one in the front and one in the back, up to two 120 or 140 case fans can be mounted in the lid.

If you want to tame your processor with a regular CPU cooler, you can use a model that is up to 16 cm high, while a power supply up to 270 mm long can supply the power needed for the gaming system. The LED lighting is supplied via a 12 volt SATA cable and a 4-pin connector allows the LED lighting of the housing to be connected to an optional LED control or motherboard with a corresponding RGB connector. With the help of optional accessories, you can install up to four additional 3.5-inch disks at the expense of the maximum length of graphics cards and eliminating the need for a front-mounted radiator. Compatible with motherboards with ASUS Aura RGB Strip Headers and RGB LEDs Thanks to the ingenious PHANTEKS RGB LED adapter cable , ASUS motherboards with built-in ASUS Aura RGB LED lighting and other models with 12V GRB headers can be integrated with RGB (or extended or retrofitted with PHANTEKS RGB LED strips) RGB -LED lighting in PHANTEKS enclosures Enthoo Luxe, Enthoo Mini XL and Eclipse P400 (S) in all variants (Standard, Window, Insulated) and colors together. The trick here is that the Aura motherboard lighting can be controlled together with the respective housing lighting on the practical ASUS ROG Aura software, which the entire gaming PC is lit uniformly at will and can display the same LED effects.

Technical details:
  • Dimensions: 210 x 495 x 470 mm (W x H x D)
  • Weight: about 7.5 kg
  • Material: steel, plastic
  • Color white
  • Form factor: E-ATX (up to 272 mm width), ATX, Micro-ATX, Mini-ITX
  • Total possible fan:
    2x 140 / 3x 120 mm (front)
    2x 140/120 mm (cover)
    1x 120 mm (back)
  • Pre-installed:
    1x 120 mm (front)
    1x 120 mm (back)
  • Radiator mountings (partial waiver of HDD and / or fan slots):
    1x max. 280/360 mm (front)
    1x max. 120 mm (back)
  • Filter: front, power supply, cover (removable)
  • Drive bays:
    2x 2.5 inches (internal, tool-free mounting)
    2x 3.5 inches (internal, tool-free mounting)
  • Power supply: 1x standard ATX (optional)
  • Expansion Slots: 7
  • I / O panel:
    1x power button (with RGB LED)
    1x LED controller
    2x USB 3.0
    1x fan control (3-stage, for 2 fans)
    2x audio
  • Maximum graphics card length: 395 mm
  • Maximum CPU cooler height: 160 mm
  • Maximum power supply length: 270 mm
Prekės atspalvis gali skirtis nuo matomo nuotraukoje. Prekės aprašymas yra bendro pobūdžio, jame nebūtinai yra paminėtos visos prekės savybės. Internetinėje parduotuvėje skelbiamos prekių kainos, akcijos gali skirtis nuo prekių kainų, akcijų taikomų prekybos, aptarnavimo centruose. Prekių likutis sandėlyje ir internetinėje parduotuvėje išimtinais atvejais gali nesutapti, todėl išlieka galimybė, kad pristatymo terminai gali skirtis nuo nurodytų užsakymo pateikimo metu ir / arba Tavo užsakymo įvykdyti negalėsime arba įvykdysime tik jo dalį (tokiais atvejais, Pirkėjas yra nedelsiant apie tai informuojamas).

Pastebėjai klaidą prekės aprašyme, savybių lentelėje ar nuotraukų galerijoje? Pranešk mums