Присоединись к SMART NET! Присоединись

Стабилизатор напряжения UPS APC, 1980 Вт

Код товара: 282959

2 431,36 / шт.
+

Получение в пакомат невозможно

Выдача в магазине

Забери бесплатно. Заказ будет выполнен предположительно 15 апреля.

Доставка курьером

Получи на дом бесплатно*. Доставим 15 апреля

Услуга курьерской доставки начиная от 15,99 €*. Доставка планируется 15 апреля.

* Стоимость доставки рассчитывается на базе платы за обслуживание и веса товара: 34.00 кг
Информация о товаре

Свойства изделия

Тип продукта UPS стабилизаторы напряжения
Бренд APC
Глубина 58.4 см
Ширина 8.5 см
Высота 43.2 см
Цвет Черный
Мощность 1980 Вт
Мощность (VA)
V обозначает напряжение в вольтах, A – ток в амперах, а номинальное значение (W) означает мощность в ваттах. W = VA x PF (PF – коэффициент мощности). Обозначает активную мощность, которую получает потребитель переменного тока. Почти у всех моделей это 0,9. В идеальном случае коэффициент = 1 и W = VA.
2200
Тип аккумулятора Свинцово-кислотный
Продолжительность работы после зарядки 9 мин
Время зарядки 3 час
Рабочая температура 0 - 40 °С
Емкость аккумулятора 0 мАч
Рабочая влажность 0 - 95 %
Дисплей
Некоторые устройства оснащены дисплеем, на котором отображаются самые значимые параметры, что облегчает использование и установку ИБП.
Да
Входы 1 x IEC-320 C20, BS1363A, Schuko CEE7/EU1-16P
Выходы 2 x IEC 320 C19, 2 x IEC Jumpers, 8 x IEC 320 C13
Гарантия 24 месяц
Дополнительная информация Nominal Input Voltage: 230V. Output Voltage Distortion: Less than 5% at full load. Waveform type: Sine wave. Battery Volt-Amp-Hour Capacity: 367. Surge energy rating: 340Joules. RJ-45. Smart-Slot. USB.
APC Smart-UPS SRT 2200VA RM
Описание на английском языке:

APC Smart-UPS SRT 2200VA RM 230V

High density, double-conversion on-line power protection with scalable runtime

Includes : CD with software , Country-specific detachable power cord , Documentation CD , Installation guide , Rack Mounting brackets , Rack mounting hardware , Rack Mounting support rails , USB cable , Warranty card

  • Battery failure notification
    Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • ECO Mode
    Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
  • LCD graphics display
    Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • Rack/Tower convertible
    Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Smart-UPS On-LineFeatures & Benefits Availability
  • Temperature-compensated battery charging
    Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Automatic internal bypass
    Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Intelligent battery management
    Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Scalable runtime
    Allows additional run time to be quickly added as needed.
  • Automatic restart of loads after UPS shutdown
    Automatically starts up the connected equipment upon the return of utility power.
  • Hot-swappable batteries
    Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Manageability
  • Network manageable
    Provides remote power management of the UPS over the network.
  • Serial connectivity
    Provides management of the UPS via a serial port.
  • InfraStruXure Manager Compatible
    Enables centralized management via the APC InfraStruXure Manager.
  • LED status indicators
    Quickly understand unit and power status with visual indicators.
  • SmartSlot
    Customize UPS capabilities with management cards.
Adaptability
  • Plug-and-Play external batteries
    Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Flash upgradeable firmware
    Install maintenance releases of firmware remotely using FTP.
  • Rack/Tower convertible
    Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Serviceability
  • Audible alarms
    Provides notification of changing utility power and UPS power conditions
  • Predicitive failure notification
    Provides early-warning fault analysis ensuring proactive component replacement.
  • Disconnected battery notification
    Warns when a battery is not available to provide backup power.
  • Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • User-replaceable batteries
    Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Protection
  • Resettable circuit breaker
    Easy recovery from overloads; no need to replace a fuse.
  • Cold-start capable
    Provides temporary battery power when the utility power is out.
  • Safety-agency approved
    Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Power conditioning
    Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Frequency and voltage regulation
    Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Generator compatible
    Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Input power factor correction
    Minimizes installation costs by enabling the use of smaller generators and cabling.
Marketing Features
  • Peace of mind that comes with full equipment compatibility and reliability of a leader
    Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
  • Low operating and maintenance costs with proven reliability and intelligent battery management.
    Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
  • Save time with easy and convenient remote accessibility.
    Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
  • Avoids costly power problems by keeping your IT equipment and data protected and available.
    Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Оттенок товара может отличаться от изображенного на фотографии. Описание продукта носит общий характер, и оно необязательно содержит все свойства продукта. Цены на товары, опубликованные в интернет-магазине, могут отличаться от цен на товары, применяемые в супермаркетах и сервисных центрах. Остатки товаров на складе и в интернет-магазине в исключительных случаях могут не совпадать, поэтому сохраняется вероятность того, что сроки доставки могут отличаться от указанных при размещении заказа и / или мы не сможем выполнить Твой заказ или выполним лишь частично (в таких случаях Покупатель будет немедленно проинформирован).

Заметил ошибку в описании товара, таблице свойств или фотогалерее? Сообщи нам