Все категории
800
Получи уже ЗАВТРА
В корзину Количество:

Способы доставки:

SELF_DELIVERY Получи в 1a.lt клиентском центре
Завтра (20.07) после 10:00
PICKUP В пунктах доставки
Завтра (20.07) после 10:00
ADDRESS C доставкой на адрес
Завтра (20.07) после 08:00

Основные характеристики товара:

  • Тип: HDD корпусы (enclousure)
  • Тип жесткого диска: 3.5"/HDD/3.5"/SDD
Больше об этом товаре

ПОДРОБНАЯ ИНФОРМАЦИЯ

Производитель Delock
Тип HDD корпусы (enclousure)
Тип жесткого диска 3.5"/HDD
3.5"/SDD
Спецификация Совместимость: 1 x SATA 22 pin
1 x 22 pin SATA 6 Gb/s female (NSS connector)
Интерфейс: SATA

Описание модели

Delock 3.5" Mobile Rack For SATA HDD/SSD
Oписание товара на английском языке:

Description
This Delock Mobile Rack is designed for external or internal connection of a 2.5″ SATA HDD. Insert the HDD directly into the frame and connect it either externally to a Power Over eSATA port with the help of an optional cable, or internally to SATA. The dimension of the frame complies to a standard 3.5″ HDD. Thus you can install the frame into a 3.5″ slot as well as into a 5.25″ mobile rack.

Specification
• Connector:
outside: 1 x SATA 22 pin female
inside: 1 x 22 pin SATA 6 Gb/s female (NSS connector)
• Suitable for 2.5″ SATA HDD / SSD:
HDD height up to 12.5 mm
SATA HDD / SSD up to 6 Gb/s
support 5 V HDD / SSD
• Data transfer rate up to 6 Gb/s
• Possible applications:
1. internally in a 3.5″ bay
2. inside a 5.25″ mobile rack
3. externally over eSATAp (cable optional)
• Hot Swap
• With special SATA NSS connector inside to protect the
SATA connector of the HDD from wear at each change
• Optional HDD fan (mounting holes on the bottom side of mobile rack)
• OS independent, no driver installation necessary

Отзывы

0.0 из 5 звездочек (Всего 0 оценок)

5★
4★
3★
2★
1★
Delock Delock 3.5" Mobile Rack For SATA HDD/SSD 47224 Delock 3.5" Mobile Rack For SATA HDD/SSD
Oписание товара на английском языке:

Description
This Delock Mobile Rack is designed for external or internal connection of a 2.5″ SATA HDD. Insert the HDD directly into the frame and connect it either externally to a Power Over eSATA port with the help of an optional cable, or internally to SATA. The dimension of the frame complies to a standard 3.5″ HDD. Thus you can install the frame into a 3.5″ slot as well as into a 5.25″ mobile rack.

Specification
• Connector:
outside: 1 x SATA 22 pin female
inside: 1 x 22 pin SATA 6 Gb/s female (NSS connector)
• Suitable for 2.5″ SATA HDD / SSD:
HDD height up to 12.5 mm
SATA HDD / SSD up to 6 Gb/s
support 5 V HDD / SSD
• Data transfer rate up to 6 Gb/s
• Possible applications:
1. internally in a 3.5″ bay
2. inside a 5.25″ mobile rack
3. externally over eSATAp (cable optional)
• Hot Swap
• With special SATA NSS connector inside to protect the
SATA connector of the HDD from wear at each change
• Optional HDD fan (mounting holes on the bottom side of mobile rack)
• OS independent, no driver installation necessary

47224 8.00
Задать вопрос

captcha
Bверх