HDD/SSD korpusas Delock, 3.5"

Prekės aprašymas anglų kalba:

Description
This Delock Mobile Rack is designed for external or internal connection of a 2.5″ SATA HDD. Insert the HDD directly into the frame and connect it either externally to a Power Over eSATA port with the help of an optional cable, or internally to SATA. The dimension of the frame complies to a standard 3.5″ HDD. Thus you can install the frame into a 3.5″ slot as well as into a 5.25″ mobile rack.

Specification
• Connector:
outside: 1 x SATA 22 pin female
inside: 1 x 22 pin SATA 6 Gb/s female (NSS connector)
• Suitable for 2.5″ SATA HDD / SSD:
HDD height up to 12.5 mm
SATA HDD / SSD up to 6 Gb/s
support 5 V HDD / SSD
• Data transfer rate up to 6 Gb/s
• Possible applications:
1. internally in a 3.5″ bay
2. inside a 5.25″ mobile rack
3. externally over eSATAp (cable optional)
• Hot Swap
• With special SATA NSS connector inside to protect the
SATA connector of the HDD from wear at each change
• Optional HDD fan (mounting holes on the bottom side of mobile rack)
• OS independent, no driver installation necessary