Kompiuterio korpusas BitFenix, juoda sp.

Prekės aprašymas anglų kalba:
Noise is an annoying side effect that is caused not only at the airport by aircraft taking off and in traffic by passing trucks. Especially in your own home, therefore, many people strive to provide peace, to find relaxation. Unfortunately, the PC is in many cases contrary to these efforts and annoying during operation with high noise.

The sources of noise are initially all rotating components, which mainly affects fans and hard drives. These should be decoupled and, if necessary, the speed reduced. Many housings support these measures and already offer ex works equipment.

In addition, an insulation can provide even lower external noise. With this modified version of the Bitfenix Enso Midi-Towers both approaches are connected and the housing is equipped with a pre-installed insulation.

The special feature of this compilation is that in addition to the pre-installed insulation mats, additional insulation material included. This is also tailored to fit and allows additional sealing of other housing parts. As a result, you have the choice of how much insulation you use to achieve an individual optimum of cooling and volume reduction.

When delivered, the Bitfenix Enso RGB Midi Tower has been equipped with insulating mats at all mandatory locations to reduce component noise. Two more mats are loosely in the housing. These are also tailored to fit and can be installed as needed. They are provided for the rear portion of the lid (5B) and the rear (6A). The mat for the upper front (3A) has already been pre-positioned.

All insulation mats are labeled, which in conjunction with an enclosed installation manual ensures trouble-free installation. The manual is specially tailored to the requirements of the Bitfenix Enso RGB Midi-Tower and explains in detail the installation, gives practical tips and explains the possibilities and insulation options.

Function: The insulating mats achieve a noise reduction via two effects. First, the soft material absorbs airborne vibrations. At the same time, the mats reduce self-propagating vibrations via the housing, above all by their own weight. Both together ensure that the outer sides of the case are hardly stimulated to vibrate. In addition, the installed fans should be throttled with the built-in control.

Further information on the material specifications of the insulation material can be obtained from the data sheet .

Note:Please note that due to the insulating mats the space inside the housing may be lower. Under certain circumstances, the laying of cables behind the mainboard tray can only be limited in comparison to the uninsulated version.

Technical details:

• BitFenix ​​Enso RGB Midi Tower, tempered glass black - insulated
• Dimensions: 210 x 489 x 454 mm (W x H x D)
• Material: steel, plastic, tempered glass
• Weight: about 7 kg
• Color: Black
• Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
• 
  Total possible fan: 2x 120/140 mm (front)
  1x 120 mm (rear)
  2x 120 mm (cover)
• Pre-installed:
  1x 120 mm (front)
  1x 120 mm static RGB (back)
• Radiator mountings:
  1x 280 mm or 1x 240 mm (front)
  1x 120 mm (back)
• Filter: cover, front, PSU
• Drive bays:
  2x 3.5 / 2.5 inches (internal)
  3x 2.5 inches (internal)
• Power supply: 1x standard ATX up to 160 mm (optional)
• Expansion Slots: 7
• I / O panel:
  2x USB 3.0 (internal connection)
  1x each audio in / out
• Maximum graphics card length: 340 mm
• Maximum CPU cooler height: 160 mm
• RGB controller connections:
  1x 4-pin RGB
  2x 3-pin RGB
  1x front button
  1x SATA power cable
• Insulation (pre-installed):
  1x Right side panel
  1x Front panel of the floor
  1x Middle section of the floor
  1x Rear section of the floor
  1x Front cover
• Insulation (clamped):
  1x upper front
• Insulation (enclosed):
  1x Rear part of the cover
  1x Back side