Prisijunk prie SMART NET ir sutaupyk! Prisijunk

Kompiuterio korpusas Kolink, juoda sp./raudona sp.


Atsiprašome, šios prekės dabar neturime. Tačiau siūlome peržiūrėti kitas šios kategorijos prekes – tikime, kad rasite panašią prekę.

Taip pat gali tęsti apsipirkimą grįždamas(-a) į titulinį puslapį arba paieškos laukelyje įrašyti, kokios prekės ieškai.
Prekės informacija

Gaminio savybės

Bendrosios charakteristikos

Prekės tipas Kompiuterio korpusai
Prekės ženklas Kolink
Korpuso dydis
Nurodo standartinį pagrindinės plokštės form-factor dydi.
Mid tower (ATX)
Medžiaga Plastikas, Plienas
Spalva Juoda sp., Raudona sp.
Integruotas maitinimo blokas (PSU) Ne

Išplėtimo galimybės

3.5 colio skyrių skaičius
Drive Bays - tai vieta techninei įrangai įdėti į kompiuterio korpusą. Šiandien dažniausiai naudojami keturių Form Factor tipų Drive bays (dydžiai) - 5,25 ", 3.5", 2.5" ir 1.8".
0
5.25 colio skyrių skaičius
Drive Bays - tai vieta techninei įrangai įdėti į kompiuterio korpusą. Šiandien dažniausiai naudojami keturių Form Factor tipų Drive bays (dydžiai) - 5,25 ", 3.5", 2.5" ir 1.8".
2

Priekinio skydelio jungtys

Jungtys
Nurodomos išorinės jungtys esančios priekinėje korpuso pusėje.
Audio-in, SD Card Reader, USB 2.0, USB 3.0

Matmenys ir svoris

Plotis 20 cm
Gylis 49 cm
Aukštis 52.6 cm
Svoris 7 kg

Papildomai

Privaloma garantija 24 mėn
Papildoma informacija Plokštės suderinamumas: E-ATX, ATX, Micro-ATX. Diskų skyriai: 3x 2.5". Išplėtimo lizdai: 7. Izoliacija (komplekte): 1x viršutinė dalis.
Prekės aprašymas anglų kalba:

Noise is an annoying side effect that is caused not only at the airport by aircraft taking off and in traffic by passing trucks. Especially in your own home, therefore, many people strive to provide peace, to find relaxation. Unfortunately, the PC is in many cases contrary to these efforts and annoying during operation with high noise.

The sources of noise are initially all rotating components, which mainly affects fans and hard drives. These should be decoupled and, if necessary, the speed reduced. Many housings support these measures and already offer ex works equipment.

In addition, an insulation can provide even lower external noise. With this modified version of the Vault housing from Kolink both approaches are connected and the design tower is equipped with a pre-installed insulation.

The special feature of this compilation is that in addition to the pre-installed insulation mats, additional insulation material included. This is also tailored to fit and allows additional sealing of other housing parts. As a result, you have the choice of how much insulation you use to achieve an individual optimum of cooling and volume reduction.

When delivered, the Vault has been fitted with insulating mats at all mandatory locations to reduce component noise. This includes the side panel and the entire floor (3-part). The mat for the lid and the front were clamped, but can be glued if necessary. Another mat is loosely in the housing. This is also tailored to fit and can be installed as needed.

All additional insulation mats are labeled, which together with an enclosed installation manual ensures trouble-free installation. The manual is specially tailored to the requirements of the Kolink Vault and explains in detail the installation, gives practical tips and explains the possibilities and insulation options.

Function: The insulating mats achieve a noise reduction via two effects. First, the soft material absorbs airborne vibrations. At the same time, the mats reduce self-propagating vibrations via the housing, above all by their own weight. Both together ensure that the outer sides of the case are hardly stimulated to vibrate. In addition, the built-in fans should be throttled with the built-in control.


Technical details:
  • Dimensions: 200 x 526 x 490 mm (W x H x D)
  • Weight: about 7 kg
  • Material: steel, plastic
  • Color: Black
  • Form factor: E-ATX, ATX, Micro-ATX
    Total possible fan: 2x 140/120 mm (front)
    2x 140/120 mm (cover)
    1x 120 mm (back)
  • Pre-installed:
    2x 120 mm (front, blue LED)
    1x 120 mm (back, blue LED)
  • Radiator mountings (partial waiver of HDD and / or fan slots):
    1x max. 280/240 mm (front)
    1x max. 280/240 mm (cover)
    1x max. 120 mm (back)
  • Drive bays:
    2x 5.25 inches (external)
    3x 2.5 inches (internal)
    2x 3.5 inches (internal)
  • Power supply: 1x standard ATX (optional)
  • Expansion Slots: 7
  • I / O Panel:
    1x Card Reader (SD, SF)
    1x USB 3.0
    2x USB 2.0
    2x Audio
  • Maximum graphics card length: 400 mm
  • Maximum CPU cooler height: 165 mm
  • Maximum power supply length: 180 mm
  • Insulation (pre-installed):
    Left side panel
    Floor (3-piece)
    Front side (clamped)
    Rear panel (2-piece)
    Lid (clamped)
  • Insulation (enclosed):
    Upper back
Prekės atspalvis gali skirtis nuo matomo nuotraukoje. Prekės aprašymas yra bendro pobūdžio, jame nebūtinai yra paminėtos visos prekės savybės. Internetinėje parduotuvėje skelbiamos prekių kainos, akcijos gali skirtis nuo prekių kainų, akcijų taikomų prekybos, aptarnavimo centruose. Prekių likutis sandėlyje ir internetinėje parduotuvėje išimtinais atvejais gali nesutapti, todėl išlieka galimybė, kad pristatymo terminai gali skirtis nuo nurodytų užsakymo pateikimo metu ir / arba Tavo užsakymo įvykdyti negalėsime arba įvykdysime tik jo dalį (tokiais atvejais, Pirkėjas yra nedelsiant apie tai informuojamas). AI Modified - Redaguota naudojant DI

Pastebėjai klaidą prekės aprašyme, savybių lentelėje ar nuotraukų galerijoje? Pranešk mums